10.Maintenance
After several use of your iron, a little amount of limescale will be built up in
the steam chamber and steam outlet, following up below self-cleaning
process, it will be well removed.
1. Fill water into reservoir up to MAX fill level.(Refer to fill reservoir)
2. Place the iron on the ironing rest, and put a sink under the ironing rest
to prepare for pouring water and ejecting steam.
3. Set temperature setting button to “MAX” position. Plug the unit into the
main socket. Allow the iron to heat up for 2 minutes
4. Disconnect the iron from main socket. Hold the iron horizontally over
the sink. Push the self-cleaning button.
5. Boiling water and steam will emit from the outlet in soleplate and wash
away the impurities and scale.
6. Move the iron backwards and forwards while this happens. Go on
letting steam and water escape until the reservior is virtually empty. Set
the steam control &self clean knob to “ ” position.
7. Insert the iron into main socket again. Set the temperature control
button to “MAX” position, Let the iron heat up again. The remainder of
the water inside the steam chamber will now vaporize.
8. Unplug from power supply and allow soleplate to cool down and wipe it
clean with a soft damp cloth.
Note:
1. During self-cleaning, it is suggested to iron on an old cloth.
2. Never use scouring pads, abrasive or harsh cleaners as this may
scratch the surface.
