Special illustration:
1. Temperature setting indicator light blink quickly to indicate that iron
temperature is too high, whereas the temperature is too low. When
temperature setting light lights up steadily, it indicates that temperature
is within the set range.
2. Due to influence from various factors, there will be difference between
actual temperature of the centre point of the soleplate and that showing
on temperature display.
3.Steam Ironing
1. Connect the appliance to a suitable power socket.
2. Set the temperature setting button to “MAX” position. The power
indicator light will blink, which indicate that the unit is being heat up.
Temperature shows on temperature display can be change. When the
power indicator light change to light up steadily, buzzer alarms one
sound, the required temperature is reached. Temperature shows on
temperature display is within the set range.
3. For every first use, press down the burst steam button several times
continuously, and then press down the self-cleaning button for about
10-20 seconds to clean the steam chamber.
4. Set temperature setting button to desired position according to different
fabrics. Act steam function, steam will come out from steam vents of
soleplate. During steaming iron, it is normal that the power indicator
light cycle from blink to light up steadily. It is because the appliance is
automatically heat preservation.
5. After use, set steam control and self clean knob to “ ” position,
disconnect the appliance from power socket.
Note:
1. Pre-heat for about 3 minutes before first time use.
2. When using the steam ironing, if no steam from the steam vent after
opened the steam knob, please put on the iron board and iron back-
wards and forwards several times, that can get it.
