14
CONNECT CAMCORDER TO THE FRONT SOCKETS
To copy camcorder recordings, you can use the front sockets. These sockets are located behind the flap on the left
hand side.
Very good Picture Quality
If you have a Hi8 or S-VHS(C) camcorder, connect the S-VIDEO input of the DVD recorder to the appropriate S-VHS
output on the camcorder.You must also connect the audio input left AUDIO right on the DVD recorder to the audio output
on the camcorder.
Good Picture Quality
If you have a camcorder that only has a single video output (Composite Video, CVBS), connect the VIDEO input on
the DVD recorder to the appropriate output on the camcorder.You must also connect the audio input left AUDIO right
on the DVD recorder to the audio output on the camcorder.
/
5
69+6
/HIW5LJKW$XGLR
DQG
9LGHR6RFNHW
&DPFRUGHU
69LGHR
6RFNHW
'
9
'
5
HF
RU
GH
U
Connect Camcorder to the Front Sockets of DVD Recorder
BASIC OPERATIONS
When you power on the unit, it will:
1. Load the disc if there is one inside the tray
2. Switch to monitor mode if there is no disc.
Whenever your recorder is in stop mode, it will switch to monitor mode.
For transitions between the disc playback, monitoring and setup menu:
1. Press play/pause key if you want to switch to disc playback mode in monitor mode or setup menu.
2. Press watch tv key if you want to switch to monitor mode in playback or setup menu state.
3. Press setup key to enter setup menu in playback or monitoring states.
Please note that the above keys function differently under different conditions. Also, you will not be able to use SETUP
key during recording. Stop key will end recording.
In FreeView mode, you can use your system as FreeView receiver.
