8
AERIAL CONNECTION
CONNECTING YOUR DVD RECORDER TO THE TV SET
The necessary cable connections must be made before you can record or playback TV programmes using your DVD
recorder.
Connect the DVD recorder directly to your TV set. If there is a video recorder in between the picture quality may be poor
because of the copy protection system built into the DVD recorder.
6FDUWDQG$HULDOORRSWKURXJKFRQQHFWLRQVWR79
$HULDO6RFNHW
6FDUW&DEOH
$8',2287
69,'(2,1
9,'(2,1
$17(11(,1
$8',2287
$8',2
,1387
69,'( 2,1
9, '(2,1
$17( 1 1( ,1
/
5
9,'(2
,1387
69,'(2
,1387
$(5,$/
,1387
62&.(7
6&$57
,1387
79
5($59,(:2)79
$HULDO6RFNHW
CONNECTING WITH A SCART CABLE (ANTENNA/AV RECEIVER)
Have the following cables ready: an aerial cable, a mains cable, a scart cable.
1.
Remove the aerial cable plug from your TV set. Insert it into the ANTENNA socket at the back of the DVD recorder.
2.
Insert one end of the supplied aerial cable into the TV socket at the back of the DVD recorder and the other end into
the aerial input socket at the back of the TV set.
3.
Plug a scart cable into the scart socket OUTPUT to TV at the back of the DVD recorder and the scart socket for
the DVD recorder at the back of the TV set (see TV set operating instructions).
4.
Switch on the TV set.
5.
Insert one end of the supplied mains cable into the mains socket MAINS at the back of the DVD recorder and the
other end into the wall socket.
6.
Press the power button on the recorder remote. In a short while the recorder display will light up and the TV should
show the first time installation screen. If this does not show then try pressing the AV button on the TV remote until the
installation screen is showing for the scart socket, e.g. EXT, 0, AV
