32
INSTALLATION
The options located in Installation Menu are :
1. Automatic Search
2. Manual Search
AUTOMATIC SEARCH
Although your FreeView receiver will not lose its settings or stored channels when switched off, you may wish to re-
install the receiver because you have moved to a different area with different broadcast frequencies, you wish to reinstate
a channel previously deleted from the channel list, or you want to watch new channels which have started broadcasting.
Press the [MENU] key to display the Main Menu and using the [UP] or [DOWN] keys, highlight the Settings line and
press [SELECT] to display the Settings Menu. Then highlight the Installation line and press [SELECT] to open
Installation Menu. You can either perform an automatic search or manual search to add channels.
MANUAL SEARCH
The FreeView receiver can search for channels automatically (searching all the broadcast frequencies for free-to-air
channels) or manually (searching one specified broadcast frequency only for any channels to be found there).
This is for searching for digital channels on a single broadcast frequency. The frequency channel number (21-68) is
entered in the box at the top left of the screen and the received signal level can be observed on the bar graphic at the
bottom. The state of the signal quality can also be seen. When [SELECT] is pressed, the receiver searches that
frequency and display a list of the channels found before returning to the Installation menu.