Goodman DVC80603B, Руководство по установке

Страница: 5 / 48

5
T
O PREVENT PERSONAL INJURY OR DEATH DUE TO ASPHYXIATION
,
THIS
FURNACE MUST BE
C
ATEGORY
I
VENTED
. D
O NOT VENT USING
C
ATEGORY
III
VENTING
.
P
ROVISIONS MUST BE MADE FOR VENTING COMBUSTION PRODUCTS
OUTDOORS THROUGH A PROPER VENTING SYSTEM
. T
HE LENGTH OF
FLUE PIPE COULD BE A LIMITING FACTOR IN LOCATING THE FURNACE
.
WARNING
A
DDITIONAL
S
AFETY
C
ONSIDERATIONS
• This furnace is approved for Category I Venting only.
• Provisions must be made for venting combustion
products outdoors through a proper venting system.
The length of flue pipe could be a limiting factor in
locating the furnace.
S
HIPPING
I
NSPECTION
All units are securely packed in shipping containers tested
according to International Safe Transit Association specifica-
tions. The carton must be checked upon arrival for external
damage. If damage is found, a request for inspection by carrier’s
agent must be made in writing immediately.
The furnace must be carefully inspected on arrival for damage
and bolts or screws which may have come loose in transit. In
the event of damage the consignee should:
1. Make a notation on delivery receipt of any visible damage
to shipment or container.
2. Notify carrier promptly and request an inspection.
3. With concealed damage, carrier must be notified as soon
as possible - preferably within five days.
4. File the claim with the following support documents within
a nine month statute of limitations.
• Original or certified copy of the Bill of Lading, or
indemnity bond.
• Original paid freight bill or indemnity in lieu thereof.
• Original or certified copy of the invoice, showing trade
and other discounts or reductions.
• Copy of the inspection report issued by carrier’s
representative at the time damage is reported to carrier.
The carrier is responsible for making prompt inspection of dam-
age and for a thorough investigation of each claim. The distribu-
tor or manufacturer will not accept claims from dealers for trans-
portation damage.
Keep this literature in a safe place for future reference.
E
LECTROSTATIC
D
ISCHARGE
(ESD) P
RECAUTIONS
NOTE: Discharge body’s static electricity before touching unit.
An electrostatic discharge can adversely affect electrical com-
ponents.
Use the following precautions during furnace installation and
servicing to protect the integrated control module from dam-
age. By putting the furnace, the control, and the person at the
same electrostatic potential, these steps will help avoid expos-
ing the integrated control module to electrostatic discharge.
This procedure is applicable to both installed and non-installed
(ungrounded) furnaces.
1. Disconnect all power to the furnace. Do not touch the
integrated control module or any wire connected to the
control prior to discharging your body’s electrostatic
charge to ground.
2. Firmly touch a clean, unpainted, metal surface of the
furnaces near the control. Any tools held in a person’s
hand during grounding will be discharged.
3. Service integrated control module or connecting wiring
following the discharge process in step 2. Use caution
not to recharge your body with static electricity; (i.e., do
not move or shuffle your feet, do not touch ungrounded
objects, etc.). If you come in contact with an ungrounded
object, repeat step 2 before touching control or wires.
4. Discharge your body to ground before removing a new
control from its container. Follow steps 1 through 3 if
installing the control on a furnace. Return any old or
new controls to their containers before touching any
ungrounded object.
T
O
T
HE
I
NSTALLER
Before installing this unit, please read this manual thoroughly
to familiarize yourself with specific items which must be ad-
hered to, including but not limited to: unit maximum external
static pressure, gas pressures, BTU input rating, proper elec-
trical connections, circulating air temperature rise, minimum or
maximum CFM, and motor speed connections, and venting.
These furnaces are designed for Category I venting only.
I
MPORTANT
N
OTE TO THE
O
WNER
R
EGARDING
P
RODUCT
W
ARRANTY
Your warranty certificate is supplied as a separate document
with the unit installed by your contractor. Read the limited war-
ranty certificate carefully to determine what is and is not cov-
ered and keep the warranty certificate in a safe place. If you are
unable to locate the warranty certificate please contact your
installing contractor or contact customer service (877-254-4729)
to obtain a copy.
IMPORTANT: To receive the Lifetime Heat Exchanger Limited
Warranty (good for as long as you own your home) and the 10-
year Parts Limited Warranty, online registration must be com-
pleted within 60 days of installation. Online registration is not
required in California or Quebec. Complete warranty details
available from your local dealer or, for Goodman
®
brand prod-
ucts, visit www.goodmanmfg.com, and for Amana
®
brand prod-
ucts, visit www.amana-hac.com.
To register your Goodman
®
brand unit, go to
www.goodmanmfg.com and click “Warranty Registration”. Com-
plete the registration as prompted.
To register your Amana ® brand unit, go to www.amana-hac.com
and click on “Warranty Registration”. Complete the registra-
tion as prompted.