GÖLZ TS 200, Инструкция по эксплуатации и список запасных частей

Страница: 26 / 55

TS200 / TS250
Translation of the original operating instruction and spare parts list
- 26-
5007090-00
BA-E
®
•
Rotate the complete cutting head and rail to the required
angle.
•
Tighten well the two grip knobs on each side of the machine.
•
Loosen the adjusting handle.
•
Adjust the depth stop and tighten it well.
•
Make sure that the blade is not touching the cutting table at
any position of the cutting table when the cutting head is at
the lowest position.
•
Put the material on the cutting table. By using the back
square control the position of the material.