GÖLZ TS 200, Инструкция по эксплуатации и список запасных частей

Страница: 24 / 55

TS200 / TS250
Translation of the original operating instruction and spare parts list
- 24-
5007090-00
BA-E
®
5.3.2 Cutting method: Free depth cutting for multiple steps cutting
In free depth cutting, the cutting head is not locked in a fixed position. This cutting method enables
multiple steps cutting which consists of moving the table back and forth with the material to be cut
under the rotating blade. For hard material, it is recommended to use this cutting method (e.g. by
doing many shallow cuts).
To do free depth cutting, please follow this procedure:
•
Switch off the machine and make sure the blade is not
rotating.
•
Loosen the adjusting handle.
•
Make sure that the blade is
not touching the cutting
table at any position of the
cutting table when the
cutting head is at the lowest
position.
•
Put the material on the
cutting table. By using the
back square control the
position of the material.