golmar NEXA Series, Руководство пользователя

Страница: 82 / 146

82
Programming fields:
Continued overleaf
Continued from previous page
Field “7”
: Configure the identification ID of the access control module.
7
Press “ 7 ” to select field “ 7 ” .
Steps: Field + D code + key button. I
8 C
or
( 1) Step
( 4) Step
Set an identification code (ID) for the access control module.
Note: Possible identification codes (ID):
“ 000 ” to “ 999 ” .
Allows an identification code (ID) to be configured for the access control module.
Note: Possible identification codes (ID): “ 000 ” to “ 999 ” .
( 3) Step
Then press the number of the next field to configure or press the C button (cancel) to exit
programming mode.
7 0
0 0
( 2) Step
0 0 0
Press the key button to finish programming the field.
Field “8”
: Configure field depth.
8
Press “ 8 ” to select field “ 8 ” .
Steps: Field + number of calling code direct call + key button.
9 C
or
( 1) Step
( 5) Step
Set the number of digits in the calling code.
Enter one of the following options:
all Field depth Column code Monitor code code C
"3" “ 000" “ 125" “ 000125"
"2"
“
001"
“
025"
“
001025
”
"1" “ 012" “ 005" “ 012005 ”
“ 0" “ 125" “ 106" “ 125106 ”
The above example shows the call code obtained if “ 125 ” is entered into the
numeric keypad.
Allows the number of digits in the calling code to be configured.
( 4) Step
Then press the number of the next field to configure or press the C button (cancel) to exit
programming mode.
8
( 2) Step
1 2 0
Press the key button to finish programming the field.
1 2
or
3
or
or or
0 1
or
Set the direct call: by entering a call code on the keypad if necessary or do not press the
key button to confirm.
Enter one of the following options:
"0" : Disable.
"1" : Enable.
( 3) Step
0 1
or
AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED DOOR PANEL
PROGRAMMING THE DOOR PANEL
0
or
3
or
If the number of digits of 0 is selected, the call code will correspond to that entered, for example, 125 followed by the code
106 will result in the call code 125106. This code corresponds to button 1 of the sound module.
( )
*
( )
*