golmar NEXA Series, Руководство пользователя

Страница: 71 / 146

71
INSTALLATION OF THE DOOR PANEL
Fastening the frame to the embedding box:
Insert the spring hinge which attaches to the product in
the embedding box, as shown in the drawing.
To fasten the frame to the embedding box, insert the
spring hinge into the housings provided for this
purpose in the frame, as shown in the drawing.
The frame can now be tilted horizontally to enable connection
and setting of the sound module, information modules and
coded module. Connect the Nexa Bus link hose to the sound
module and information modules as shown in the following
section.
Connection of the Nexa Bus between the sound module and the coded module:
I nsert one end of the Nexa Bus link hose supplied with the N3301/AL
product into the sound module connector and the other end into
either of the two connectors situated on the bottom right of the
N3301/AL coded module. The EL3002 door panel lighting modules
can be connected in the same way.
NOTE: Only the EL632 or EL642 sound module /EL642 Plus EL632/ R5
should be connected to the power supply unit. The N3301/AL coded
module and the EL3002 lighting module are powered by the Nexa
Bus link connector. See p.
for the wiring diagrams. 93-94
AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED DOOR PANEL
Once the wiring and configuration work is done,
fix the frame to the embedding box using the
screws supplied. Then place the coded module
into the frame to make the Nexa Bus link connection
between the sound module, lighting modules and
coded module as indicated in the following point.
IMPORTANT: For the location of the electronic modules in a Gtwin system, see page . 57
*
( )
*
( )
*
( )
IMPORTANT: For the location of the electronic modules in a Gtwin system, see page . 57
*
( )
*
( )