25
Connection of an output button
Connection for an apartment door button (T-ART telephone)
The output button allows remote activation of the lock release connected between the CV- and CV+ terminals (by
default) or the relay output
The delay time in carrying out the activation is
seconds,
(installer programmable).
2
with the possibility of setting it to between 0.5 and 10 seconds (installer programmable).
Only connect the apartment door button to the master
of the apartment that will be receiving the call
telephone
(see
note "HZ" page 14). The signal received is then transmitted to the slave telephones in the same apartment.
CV-
BUS
CV+
BUS
C
NA
AP-
T-ART/ G2+
IMPORTANT:
Installation with 2 access door panels and AP button on both door panels, one of the door
panels must connect the AC lock release (instead of DC lock release) with a SAR-12/24 relay and a
transformer TF-104, (see page 4 .
2 )
HZ
HZ
AP
AP+
Connection for an apartment door button (ART 1/G2+ terminal)
Only connect the apartment door button to the master
of the apartment that will be receiving the call
terminal
(see
note "HZ" page 8)
)
. The signal received is then transmitted to the slave terminals in the same apartment .
ART /G2+
1
HZ
HZ
AUX
AUX
SOUL/1A
DOOR PANEL
SOUL
ART
S 110
4
1 G2+ / T-ART G2+ AUDIO DOOR ENTRY SYSTEM KIT
WIRING DIAGRAMS
