8
ART 1/G2+ TERMINAL DESCRIPTION:
Funtion push button:
Descrip i n:
t o
DIP 8,9
00 - Master
10 - Slave 1
OFF = 0 | ON = 1
01 - Slave 2
11 - Slave 3
DIP 1 to 7
Monitor address
DIP 10
End of line resistor
SA
BUS
HZ
GND
GOLMAR S.A.
C/ Silici, 13. 08940-SPAIN
ART 1/G2+
12210140
V03
MADE IN CHINA
WARNING
TO PREVENT
FIRE OR ELECTRIC SHOCK,
DON’T EXPOSE THIS DEVICE
TO RAIN OR MOISTURE
g
i
a.
b.
c.
Speaker.
Function push buttons.
Raised dots for the visually impaired people.
In call
m
tion:
/ com unica
Above this raised dot is the "Start/ End
communication" button.
Above these raised dots is the "Door openning"
button.
f
Micr
.
ophone
Wall mounting connector fixing (x4).
Configuration switches.
Golmar use.
Bus connections terminals.
Apartment front door button input
.
"HZ"
Auxiliary call repeater output:
“
SAV-12"
(
x 50mA/12V
).
Ma .
dc
d.
e.
f.
g.
h.
i.
j.
b
b
a
d
c
e
h
e
AUX
b
j
Start/stop communication button.
2 short
In standby:
press to "intercom" call (within the same apartment)
and press for 3 seconds to "autoswitch-on" function.
See page 10-11.
In standby: short press, it allows to change tone call
volume, on every short press terminal reproduces
the selected volume (cyclic min/ med/ max/ o
ff
"do
not disturb").
on every short
In communication:
press, it allows to change the speaker of the ART 1
audio volume (cyclic 4 audio levels). See page 10-11.
-
: Led will blink (white color).
During call door panel, guard or intercom process
Terminal in communication: Led switch on (white color).
-
: Led switch on (red color).
"Do not disturb" mode
"Default tones
& tones volume
": Led blink 5 times (red color).
-
Led switch on (red color).
"Doctor mode":
HZ: (
)
Black
Funtion push button status LED:
Descrip
terminals:
tion connection
During the call or communication processes: one
press will activate the lock release
:
2. In standby
press the button for 3 sec. to activate the staircase
light the
modules
2+ and
(
SAR-G
SAR-12/24
required 5 short press to default tones
& tones
).
volume (led
blink 5 times).
10-11.
See page
HZ: ( ed)
R
GND:
(Black)
SA:
( ed)
R
During the call or communication processes: one
press will activate the lock release .
:
In standby
1
press the button for 5 sec. to activate/deactivate
the
"Doctor mode" function.
10-11
See page
.
BUS, BUS: Communication BUS (non-polarised).
SA, GND: Auxiliary call repeater output
( ax 50mA/12V
).
:
“
SAV-12". M
dc
HZ, HZ: Apartment front door button input:
Connect only on the
. The signal received is then transmitted to the
terminal
slave
in the same apartment through the BUS.
terminals
Note: HZ push button function mode:
When HZ push button is pressed will be call tone and activate the output of
auxiliary call repeater with standby terminal, call process, communication process (HZ tone with lower audio level),
intercom process and "Do not disturb" mode.
BUS
BUS
No function.
SOUL
ART
S 110
4
1 G2+ / T-ART G2+ AUDIO DOOR ENTRY SYSTEM KIT
