GOL 737-8, Руководство по эксплуатации, Страница: 150 / 1826

737 MAX Flight Crew Operations Manual
Normal Procedures -
Amplified Procedures
MN-FLT-OH-201 NP.21.14
Display selector panel ................................................................... Set
MAIN PANEL DISPLAY UNITS selector - NORM
LOWER DISPLAY UNIT selector - NORM
TAKEOFF CONFIG light (as installed) ............. Verify extinguished
CABIN ALTITUDE light (as installed) .............. Verify extinguished
Disengage light TEST switch ............................................. Hold to 1
Verify that the A/P light is illuminated steady amber.
Verify that the A/T light is illuminated steady amber.
Verify that the FMC light is illuminated steady amber.
Disengage light TEST switch ............................................. Hold to 2
Verify that the A/P light is illuminated steady red.
Verify that the A/T light is illuminated steady red.
Verify that the FMC light is illuminated steady amber.
STAB OUT OF TRIM light ................................ Verify extinguished
Do the Initial Data from the CDU Preflight Procedure and verify that
the IRS alignment is complete before checking the flight instruments.
Flight Instruments .................................................................... Check
Verify that the flight instruments indications are correct.
Note: verify altimeter for RVSM limits.
Verify that only this flags are shown:
• TCAS OFF
• NO VSPD until V-speeds are selected
• Expected RMI flags
Verify that the flight mode annunciations (FMA) are correct:
• Autothrottle mode is blank
• Roll mode is blank
• Pitch mode is blank
• AFDS status is FD
Select the map mode
March 1, 2021