B l u e B o x – M e n u O p e r a t i o n
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 70 / 96
www.go-sys.de
8.2.2.1.5 Interval and Average
Sensor menu 8.2.2.1
Interval:
Time in seconds between the end of a measurement and the end of the next measurement.
∗
Choose the interval according to the characteristics of the sensor. Each sensor requires a certain minimum
period for measuring a value. Please note the data sheet of the sensor.
The higher the interval is set, the fewer measurements are taken, the shorter the download time.
Averaging:
The measurement value is the arithmetic average of the selected number of single measurements.
Current settings are displayed as "Actual value".
Deletes the last entered character.
Saves the input and switches back to the Sensor menu.
Switches back to the Sensor menu without saving the input
∗
The measurement interval is calculated in advance from the set interval time, the number of individual measurements and the
properties of the sensor. This results in a low time drift of the recording times of the measurement values.
Interval
Average
Interval
Actual value 60
1
2
3
4
5
6
7
0
8
9
<
<–
Ok
Average
Actual value 6
1
2
3
4
5
6
7
0
8
9
<
<–
Ok
measurement cycle
interval
new
measurement
measuring
time
single
measurements
(here 5)
idle time
<
Ok
<–
