B l u e B o x – M e n u O p e r a t i o n
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 33 / 96
www.go-sys.de
8.1.1 Parameter Display 1-way
Here, as an example, the parameter display of an oxygen sensor with integrated temperature sensor and a ph
sensor.
The measurement value of a sensor is displayed for 6 s, thereafter the display switches in a cycling way to the
display of the next sensor. The order is alphabetical
∗
.
1.
Oxygen
2.
pH value
3.
Temperature
The bar graph on the left side of the display shows the current measurement value.
Status messages appear instead of the measurement value and are marked in colour:
yellow = Status 0 | orange = Status 4, 50, 51 | rot = all others see
Appendix J – Status Messages
Buttons
Switches to the parameter display of the previous sensor/actuator.
Switches the cycling of the parameter display off.
Switches to the parameter display of the next sensor/actuator.
Switches the cycling of the parameter display off.
Switches the cycling of the parameter display on and off.
The button is also a status indicator.
Cycling on
: In the upper right corner time and date are displayed.
Cycling off
: In the upper right corner time and date of
the last measurement
are displayed.
In the maintenance service mode this button appears, it calls up the
maintenance service menu. see 8.2.4 Service Mode (Maintenance)
At current user-defined error messages, this button appears. see
8.1 Parameter Display
Switches to the Main menu.
∗
The sequence is that of the ASCII numeric value, i. e.: Special characters
numbers
capital letters
lower case letters
10 mg/l
Oxygen
0
20
M enu
10:19:08
15.04.18
S er vi ce
0
14
11 pH
pH value
M enu
10:19:08
15.04.18
S er vi ce
0
60
18 °C
Temperature
M enu
10:19:08
15.04.18
S er vi ce
S er vi ce
M enu
Settings via
8.2.1.6 Display
