Go Power DOMETIC GP-ICR-50, Руководство пользователя

Страница: 27 / 34

gpelectric.com | [page 27]
SHORE POWER
UNIT READINGS
INVERTER
ON/OFF
CHARGER
ON/OFF
ENTER / SET BACK
UNIT SETUP
REMOTE SETTINGS
®
SHORE POWER
UNIT READINGS
INVERTER
ON/OFF
CHARGER
ON/OFF
ENTER / SET BACK
UNIT SETUP
REMOTE SETTINGS
®
Power Save
OFF
Screen Setup
Contrast = 80%
4. POWER SAVE
The power save setting is used to control the LCD back light of the remote
control screen. Shutting down the back light will save DC power and elim-
inate glare from the screen. Whenever the remote goes into power save
mode, the back light can be reactivated by pressing any button.
The default setting for power save is 60 minutes (after 60 minutes of inactiv-
ity the LCD will turn off), this can be changed to 1, 5, 10, 15, 30, 45 and 60
minutes. The power save setting can also be turned OFF by selecting OFF.
5. SCREEN SETUP
The screen setup is used to adjust the contrast of the LCD screen and the
back light brightness for the best looking display based on the current
lighting conditions and viewing angle.
The default setting is 80% and the range is 0-100% (10% increments).
4.7 FUNCTION INDICATION
The function indication displays which mode the
Inverter/Charger
is presently in, which is displayed in the lower left section of the screen.
The three functions are invertering (“INV”), charging (“CHG”), power sharing (“PS”) and pass through (“PT”).
4.8 ERROR STATES
Error Code Description
0
Overload Protection Failure
1
Power Off Failure
2
Undervoltage Protection Failure
3
Overvoltage Protection Failure
4
Short Failure
5
Output Overcurrent Protection Failure
6
Battery Undertemperature Protection Failure
7
Battery Overtemperature Protection Failure
8
Environment Undertemperature Protection Failure
9
Environment Overtemperature Protection Failure
10 Device Undertemperature Protection Failure
11
Device Overtemperature Protection Failure
12
PTOC Shutdown Time overcurrent Protection Failure
OPERATION