7
6
Packing contents
Packing contents
Laminator
This machine needs to get pressor from out side in order to operate Bursting Roller.
Carriage & Installation
Feature
�Amount of increased film
�Multi talanted plate
�Strong cooling system
�8-bit Microprocessor Control
�LCD panel for error protection
�Safty plate
�Film alignment device for Up & Down (patent)
�Lamination for Both Side & Single Side � Film guide
User's Guide
Fuse 3.15A
Fuse 6.3A
INTRODUCTION AND FEATURE
Thank you for purchase GMP Laminator.
GMP Laminator is one of the best in the world and developed following customer's requirement.
GMP Laminator produced by close quality inspection.
Read user's manual careful, and save this manual for later use.
Insert the Enclosed Air Hose into the compressor.
Insert the Air Hose into the machine.
Pull the cap after power supply is connected to the
compressor.
Push as shown in the picture.
We recommend the compressor is installed outside. If it is installed inside the lamitable, hot temperature
can affect the machine. Dry filter has to be cleaned everyday.
Reference
▶Carriage
: Please be careful when you unpack and move the machine.
▶Installation
: Please install the machine in the even and hard place.
▶Power connection
: Power over AC 220V/15A is not permittable. Use the power supply only for this machine.
Grounding is necessary for safety. Please refer to Page 3~4.
GROUND
Carriage & Installation
Connecting Compressor
