GMP SURELAM-PRO540HR, Руководство пользователя

Страница: 12 / 13

23
22
MAINTENANCE
Tips for maintenance guide
It is strongly recommended to clean the roller when it is cooled off.
Otherwise that may cause injury.
Caution
TROUBLE SHOOTING
▶ Decrease roller pressure
▶ Increase roller pressure
▶ Operate cooling fan after lowering the speed more than 2steps.
If not solved by cooling fan,cool off the laminator for 30minutes.
This symptom caused by high temperature of the pulling roller.
▶ Check the fuse. If it happens more than twice,contact the A/S
▶ Check the circuit breaker.
Symptom Solution
▶ See if emergency stop button is pressed.
▶ Increase pressure on the clutch
▶ See if fuse is cut
▶ Check roller pressure control knob position.
▶ It works normal only when rollers are pressured.
▶ Increase roller pressure
▶ Decrease roller pressure
▶ Operate cooling fan
▶ Operate the cooling fan
▶ Decrease roller temperature
No power on
Rollers are notrunning
Symptom of picture "A"
Symptom of picture "B"
Symptom of picture "C"
Symptom of picture "D"
Symptom of picture "E"
Symptom of picture "F"
1)To release the roller pressure handle after finishing the lamination.
2)When the heat roller is heated and pressured, operate the roller
3)Heat roller temperature needs to be kept at 0℃ when the machine is not used more than 1hour.
-There are for protecting the roller and machine damage
▶ While laminating, the glue will be squeezed out, which is general symptom.After laminating,
please clean the roller Cleaning for the roller Laminated material could be contamiated by the foreigb
object of the roller To prevent these phenomenon,cleaning of rollers are strongly recommended as
explained below. sopropyl alcohol must be used to clean the roller The more you clean the roller
after lamination,the better maintenance you can expect.
▶ Cleaning of the main body
Use soft cloth to clean main body and cover.
*If detergent or chemicals are used to clean the laminator,keep the instruction of the
followingcaution.
Caution
Do not overload a power supply
Pull out the plug from power outlet.
Do not use the material which is not specified in the above.