15
14
▶ Decurling Bar
To avoid Curling after Single Side Lamination.
The Angle for Decurling can be adjusted by Decurling Adjust Knob.
(Refer to the "Decurling Adjust Knob" for control.)
This Laminator is for Single & Double Side Laminator.
For the Single Side Lamination, it is natural thing to have curling on
the laminated results and is not caused by trouble in the machine.
In order to adjust the Decurling Value, please rotate the know to the arrow on
the picture.
▶Decurling Adjust Knob
To adjust the Film Position (to the left or the right) after the film loading.The
rotating of the knob makes film moving little by little.
Use this for minute adjustment of film position
▶ Film Position Adjustment Knob
To adjust Roller Pressure. The proper pressure can be selected.
▶ Roller Pressure Adjustment Lever
Decurling Adjust Knob
Film Tension Adjustment knob
To convert the Laminating Condition.
Double Side : For Double Side Lamination / reduce the speed.
Single Side : For Single Side Lamination / increase the speed..
▶ Single & Double Side Lamination Converting Lever
Roller Pressure Adjustment Lever
Film Position Adjustment Knob
The Film Tension can be adjusted.
Rotate it to the right to increase the Tension & Rotate it to the left
to decrease the Tension.
▶ Film Tension Adjustment Knob
Single & Double Side Lamination
Converting Lever
SINGLE SIDE
DOUBLE SIDE
Front Plate Safety Sensor
▶ Front Plate Safety Sensor
They are equipped at the Right / Left ends between the Front Plate & Upper
Roller.make the machine stop for operator's safety & for protection of
machine.
Back Trimmer
▶ Back Trimmer
The Trimmer is used to trim the laminated results.
Press the Lever and push it from the left to the right to trim the results.
How to Use the Main Devices
How to Use the Main Devices
Rotate the Knob to the Right, the result will be curled as the above.
Rotate the Knob to the Left, the result will be curled as the above.
Decurling device
Pull roller
Rotate the Knob to the Right, the result will be curled as the above.
Rotate the Knob to the Left, the result will be curled as the above.
