GME Electrophone TX3400, Инструкция по эксплуатации

Страница: 8 / 25

8
SELECTIVE CALLING
the priority channel and will stay there for as
long as the channel is busy. During this time
you can transmit on the priority channel in
the usual way. Once there has been no
activity on the priority channel for 5
seconds, the radio will resume scanning the
other channels.
• To talk on the priority (working) channel
while scanning, simply press the Push-To-
Talk switch on the microphone. The radio
will switch straight to the Priority channel.
When you have finished your conversation
and there has been no further activity on the
priority channel for 5 seconds, the radio will
resume scanning the other channels.
• If your radio pauses on a busy channel and
you don't wish to listen to that conversation,
briefly press the CALL button on top of the
microphone. The radio will skip over that
channel and resume scanning from the next
channel in the sequence.
• If your radio is paused on a busy channel
and you wish to remain there, briefly press
the SCAN key. The radio will exit the Scan
mode and remain on the busy channel. Note
that the radio will no longer be monitoring
the Priority channel (unless it is the busy
channel). To resume scanning, press the
SCAN key again.
• To go directly to the Priority channel, briefly
press the Channel knob. The radio will exit
the Scan function.
Ending the Group Scan.
To cancel the Scan mode, briefly press the
SCAN key. A low beep will be heard and
‘SCAN’ will disappear from the display. If the
radio was on a busy channel it will remain on
that channel, otherwise it will return to the
priority channel.
GENERAL OVERVIEW
What is Selcall.
Your TX3400 has a Selective Calling (Selcall)
system which operates like your telephone.
Your radio has been programmed with its own
unique number. When this number is called,
your TX3400 will beep to alert you.
If you do not want to hear any other activity
while on the channel, you can push a QUIET
button. The radio will then remain quiet until
your number is called.
Your radio allows you to store up to four of your
most frequently called numbers in memory.
Each number can be labelled with a 5 letter
name for easy identification.
Selcall Identification Number (Ident).
Your TX3400 is factory programmed with its
own unique Selcall Identification Number
(Ident). This number identifies your radio from
others in your area. You will need to make your
Ident known to anyone who may need to call
you with Selcall. Whenever your TX3400 hears
a Selcall signal, it compares the incoming Ident
with its own. If the two Idents match, the radio
knows it is being called and sounds an alarm to
alert you to the call.
The Selcall Ident for your radio is printed on the
label on the rear panel of the main unit. The
Ident is the last 5 digits of the radio’s serial
number.
The Selcall Ident is also displayed in the
bottom left of the LCD for a second each time
the radio is turned on.
NOTE: Although your radio’s Selcall Ident is
pre-programmed at the factory, you can
arrange to have your dealer change it if
required.