GME Electrophone TX3400, Инструкция по эксплуатации

Страница: 12 / 25

12
USING THE QUIET MODE
The QUIET mode prevents any incoming
transmissions from being heard in your
TX3400’s speaker until your Selcall Ident is
received. This allows you to monitor a busy
channel for calls without being disturbed by
unwanted signals.
When your Selcall Ident is received, the QUIET
mode is cancelled and all incoming signals will
be heard in the speaker.
The QUIET mode is setup by first tagging the
channels that you want to stay Quiet, then
activating the QUIET mode. Once QUIET is
activated, the channels you have tagged will
remain Quiet to all incoming signals. Channels
not tagged will operate normally.
To Tag individual channels for QUIET
operation.
1. Select the required channel by rotating the
Channel knob.
2. Press and hold the Volume/Quiet knob until
a high beep is heard. ‘Q’ will appear to the
upper left of the channel number indicating
this channel is now tagged for Quiet
operation.
Repeat steps 1 and 2 to tag all required
channels.
To Activate the QUIET Mode.
1. Select any channel that has been tagged for
Quiet operation. ‘Q’ will be displayed.
2. Briefly press the Volume/Quiet knob.
‘QUIET’ will appear on the right of the
display.
Now all channels tagged for Quiet operation
will be operating in the Quiet Mode.
(You can test this by opening the squelch using
the squelch key and selecting various channels
with the Channel knob. The radio’s background
noise will be heard on normal open channels
but will remain quiet on those channels that are
set for Quiet operation.)
NOTE: You cannot activate the Quiet mode
unless you have selected a ‘tagged’ channel
with ‘Q’ displayed.
To De-activate the QUIET Mode.
1. Select any channel that has been tagged for
Quiet operation. ‘Q’ and ‘QUIET’ will be
displayed.
2. Now briefly press the Volume/Quiet knob.
‘QUIET’ will disappear on the right of the
display and all channels tagged for Quiet
operation will now operate normally again.
To Remove the QUIET Tagging.
1. Select a channel that has been tagged for
Quiet operation. ‘Q’ will be displayed to the
upper left of the channel number.
2. Now press and hold the Volume/Quiet
knob until a low beep is heard. ‘Q’ will
disappear indicating this channel is no
longer tagged for Quiet operation.
Receiving Signals in the QUIET Mode.
• If a normal signal is received on a QUIET
channel, the channel will appear busy but
no sound will be heard from the speaker.
This means you will not be disturbed by the
signal.
• If a normal signal is received on an Open
channel (one that is not tagged with ‘Q’) the
signal will be heard in the usual way.
• If a signal containing your Selcall Ident is
received on any channel - Open or QUIET -
the QUIET mode will be cancelled and the
alarm will beep to alert you to the call. In
addition, the callers Ident or Name will be
displayed. All channels will now be open for
normal transmission and reception.