GME Electrophone TX3400 Скачать руководство пользователя страница 24

24

GME ELECTROPHONE limit this warranty to the
original purchaser of the equipment.

GME ELECTROPHONE warrant the TX3400 to be free
from defects in material and workmanship for a period
of twenty four (24) months from the date of purchase
from their authorised dealer.

GME ELECTROPHONE warrant the microphone to be
free from defects in material and workmanship for a
period of twelve (12) months from the date of
purchase from their authorised dealer.

Should the product require servicing during this
period, all labour and parts used to effect repairs will
be supplied free of charge.  GME ELECTROPHONE
reserve the right to determine whether damage has
been occasioned by accident, misuse or improper
installation whereby the warranty would be void,
including:

Equipment which has been damaged due to:

(a)

Incorrect or reverse polarity connection to a
battery or power supply.

(b) Connection to incorrect supply voltage.

(c)

Operation without an antenna or by connection to
an antenna which has been incorrectly installed,
resulting in damage to the transceiver’s output
circuit.

(d) Effects of water or moisture penetration.

(e)

Non-factory modifications.

Procedure to be followed by claimant:  In the event of
a defect occurring during the warranty period, the
original Purchaser may return the defective unit along
with suitable proof of purchase date (i.e. receipt,
docket, credit card slip etc.) and a full description of
the defect to the Dealer from whom the unit was
purchased.

All freight charges incurred for transportation by the
Dealer or GME ELECTROPHONE are the Purchaser’s
responsibility.

The Dealer will forward it to the closest authorised
GME ELECTROPHONE Service Depot in your
particular State.

WARRANTY

Your ELECTROPHONE transceiver is especially
designed for the environment encountered in mobile
or portable installations.  The use of all solid state
circuitry, careful design and rigorous testing, result in

high reliability.  Should failure occur however, GME
ELECTROPHONE maintain a fully equipped service
facility and spare parts stock to meet the customer’s
requirements long after expiry of the warranty period.

GME ELECTROPHONE AFTER SALES SERVICE

A Division of

Head Office: SYDNEY

6 Frank Street,
GLADESVILLE  2111
(02) 9844 6666
Fax : (02) 9844 6600

MELBOURNE

103 Woodlands Drive,
BRAESIDE  3195
(03) 9590 9333
Fax : (03) 9590 9344

BRISBANE

Unit 1, 89-101 Factory Rd.,
OXLEY 4075
(07) 3278 6444
Fax : (07) 3278 6555

Website: www.gme.net.au

Part No.: 310151
Dwg. No.: 40936-2

ADELAIDE

Unit 1, 4 West Thebarton Rd,
THEBARTON  5031
(08) 8234 2633
Fax : (08) 8234 5138

AUCKLAND

P.O. Box 58446
GREENMOUNT
(09) 274 0955
Fax : (09) 274 0959 

PERTH

Unit 1, 10-12 Harvard Way,
CANNING VALE  6155
(08) 9455 5744
Fax : (08) 9455 3110

STANDARD COMMUNICATIONS PTY. LTD.

*

*

Содержание Electrophone TX3400


























Отзывы: