GLT Fox-Up, Инструкция по установке и эксплуатации

Страница: 6 / 108

R
4
3. DELIVERY UNITS / DELIVERY CONTENTS
A complete Fox up ventilation unit consists of an EPS wall duct and a fan unit for insertion into the wall duct. The fan unit
consists of a reversible fan (12 V/DC) and a ceramic heat accumulator for heat recovery.
Air is fed into the room through a design plate with filter insert, and carried to the outside through a weatherproof protective
hood.
The unit is operated via an electronic control system with control panel, and up to six ventilation units (3 x delivery, 3 x
extraction) can be controlled by the electronic control system. The electronic system is installed in a double-cavity wall box for flush-moun-
ted fitting.
The following delivery units are available for the various installation steps:
• Fox up-GP-Design , item no. 1145200: basic package consisting of wall duct (500 mm long), fan unit, inner plate, weatherproof protec-
tive hood and electronic control system with hollow-wall flush-mounted box.
• Fox up-EP-Design , item no. 1145201: supplementary package consisting of wall duct (500 mm long), fan unit, inner plate and weather-
proof protective hood.
• Fox up-Shell set 500 mm , item no. 1145210: shell set consisting of wall duct (500 mm long) and hollow-wall flush-mounted box.
• Fox up-Shell set 1000 mm , item no. 1145211: shell set consisting of wall duct (1000 mm long) and hollow-wall flush-mounted box.
• Fox up-Shell set 500 mm, item no. 1145212: shell set consisting of wall duct (500 mm long)
• Fox up-Shell set 1000 mm , item no. 1145213: shell set consisting of wall duct (1000 mm long)
• Fox up FMS-GP-Design , item no. 114220: final assembly basic package consisting of fan unit, inner plate, weatherproof protective
hood and electronic control system.
• Fox up FMS-EP-Design , item no. 1145221: final assembly supplementary package consisting of fan unit, inner plate, weatherproof
protective hood and electronic control system.
Fox up ventilation unit complete
1. Weatherproof protective hood (air inlet/outlet opening on outside)
2. EPS wall duc t
3. Design valve (air inlet/outlet opening on room side)
4. Fan uni t (incl. ceramic heat accumulator and filter insert)
5. Control panel / electronic control system