Page 18
SmartOne C User Manual
Confidential & Proprietary Information
9100-0410-01 R2.4
STANDARD MESSAGING MODE - WITH MOTION
The Standard Messaging with Motion Mode is selected for basic
tracking functionality with motion detection capabilities. The user
defines the motion parameters for each application including the
Level of Sensitivity of the motion sensor, Time to be in a State
of Vibration and Time to be in a State of Lacking Vibration. The
SmartOne can be set to report at a different rate, Message Interval
while In Motion, compared to the Location Message Interval.
SMARTONE SOLAR ONLY – SPEED AND HEADING
Speed and Heading cannot be used for SmartOne C devices. This feature is for use with SmartOne Solar only.
Contact your Globalstar Regional Sales Manager for additional guidance in using this feature.
REDUCED MESSAGING MODE
The Reduced Messaging Mode is ideal for asset management with reduced messaging capability of the
SmartOne. The SmartOne creates a Change of Location Area of a configurable size around the device. If the
SmartOne stays within its Change of Location Area, the number of transmissions will be reduced.
When the SmartOne leaves the Change of Location Area and returns to a State of Lacking Vibration, a new
Change of Location Area is created around the SmartOne.
