Page 48
SmartOne C User Manual
Confidential & Proprietary Information
9100-0410-01 R2.4
CHANGE OF LOCATION AREA ALERT MESSAGE
This is the message transmitted when the SmartOne detects that it has left its Change of Location Area.
The Standard Message Subtype field of this message, contained in byte 7; bits 4-7, has a value of 2.
INPUT STATUS CHANGED MESSAGE
This is the message that will be transmitted upon the change of state of the inputs if it is enabled and as selected by
the user:
• Input 1 open, Input 1 closed, or Input 1 both(open or closed)
• Input 2 open, Input 2 closed, or Input 2 both(open or closed)
The Standard Message Subtype field of this message, contained in byte 7; bits 4-7, has a value of 3.
The Input Status Value of byte 7; bits 0-3 in the Standard message indicates the type of Input change (Input 1 or
Input 2) that triggers the message and the status of inputs (open or closed).
The reporting of the inputs status may be configured in 2 different ways:
1. The status of inputs captured when the input state message is actually triggered.
-This option will indicate the input states closed or open when message was triggered by the S1C.
2. The status of inputs captured while building the Standard Message and is ready to transmit.
-This option will be helpful when Input Status Changed Message is configured with GPS.
-This option will give flexibility to capture Missed Input State Change status while obtaining a GPS fix.
-This option will give flexibility to capture status of Inputs after GPS fix is obtained since the GPS fix could take
up to a maximum of 4 minutes.
