Page 14
SmartOne C User Manual
Confidential & Proprietary Information
9100-0410-01 R2.4
• Read Diagnostic Information from Device -
This command
line causes the Configuration Software to query the diagnostic
information from the SmartOne and display the information in
a pop-up window in a text format.
• There are two menu options available in the pop-up window:
• Print Diagnostic –
Prints the diagnostic information.
• Save Text to File –
Opens a window, which allows the
user to browse for a location and save the diagnostic
information in a text file.
• Test Vibration Sensor Sensitivity -
Is used to find the
minimum, maximum and average vibration sensitivity
detected by the sensor. This information helps to determine
the appropriate Level of Sensitivity for the motion sensor.
This window will update real time while connected to the
SmartOne.
NOTE:
Contact your Globalstar Regional Sales Manager
for additional guidance in using this feature.
•
AirFinder Configuration
NOTE:
This feature is for use with SmartOne Solar only. Contact your Globalstar Regional Sales
Manager for additional guidance in using this feature.
• Continuous GPS Configuration -
This command opens an Unlock Continuous GPS Window to enable
the ability to configure SmartOne C for continuous GPS.
NOTE:
Use only with SmartOne C: See Continuous GPS
Mode Section.
