Gliderol Storm Safe, Инструкция по установке и эксплуатации

Страница: 12 / 20

12
2.5 Attach Bracing/Struts
Doors above and equal to 4951mm will be provided with at least one Gliderol strut per panel which must
be installed at the centre of each panel covering the entire door width. If the Strut is longer than the door
width it must be cut to exact door width size (including the aluminium stile).
If your door is less than 4950mm wide and provided with two struts one must strut must be installed
to TOP and BOTTOM panel at the centre. If your door is less than 4950mm wide and provided with one
strut it must be installed to TOP panel at the centre.
Refer to Drawing GLI-C2SOH-002 for full fixing details.
IMPORTANT: The first screw or the external screw must be secured at the centre of Aluminium stile
to ensure it does not protrude through the wind lock area which might result in door jamming during
operation.
2.6 Installing Panels
Slide the bottom panel into the vertical tracks and ensure the equal distance is maintained on both the
sides and rollers are engaged in the track and move freely. Check that door panel is level by placing
spirit level on top edge of door panel. If panel is not horizontally level it may be necessary to use suitable
packer underneath door panel to achieve level.
Make sure vertical tracks are level.
Lower the next door panel on top of the bottom panel and ensure the panel outer edges are flush with
each other and roller is engaged in the vertical tracks properly. Fasten the hinges from the Bottom panel
on to the Second panel using metal self drilling screws. Repeat this step for the next panels except the
top panel.