Gliderol Storm Safe, Инструкция по установке и эксплуатации

Страница: 7 / 20

7
2.0 Installation Instructions
2.1 Installing Aluminium Uprights
Measure the opening size, side room and headroom dimensions to ensure the sectional door fits the
opening. Refer to various dimensions and clearances (available on previous pages) before proceeding
with installation.
Determine panel overlap on either side of the daylight opening (minimum 30mm per side) and mark
two evenly spaced perpendicular lines from floor level on either end of the opening 8mm from the panel
overlap.
Using appropriate fasteners (refer to certified drawings depending on abutment type Steel/Timber/
Block) secure both Aluminium Uprights on the marked line as per the figure below. To locate the screw
holes, a hairline is marked on the Aluminium uprights. The maximum spacing between the fixings must
be 300mm centres. Refer to certified drawing for full details.