Gliderol Storm Safe, Инструкция по установке и эксплуатации

Страница: 10 / 20

10
2.3 Preparing the Door Panels
Select door panel with weather seal pre-installed to bottom edge. Place this panel face down on a
soft support (eg two padded saw horses).
Attach the Bottom Cable Bracket and Inner Bottom Bracket to each bottom corner of the panel
using 1/4’ metal screws. Hook one cable over steel extrusion either end. Attach cable to the Bottom
Bracket on both ends of the bottom panel as shown below.
IMPORTANT: Do not use screw holes on the edge of Bottom Bracket as the screw will penetrate
the Windlock area and jam during door operation.