Gliderol Storm Safe, Инструкция по установке и эксплуатации

Страница: 15 / 20

15
2.7 Torsion Spring Assembly cont...
Once you have completed the desired number of turns secure the set screws on the spring block to the
shaft. Remove the winding bars.
WARNING: Always ensure that your body and face are to the side of the winding bars.
Congratulations you have now successfully commissioned your Gliderol sectional overhead garage door.
If installing an automatic operator, please refer to the Giderol Operator installation instructions provided.
Final Adjustments
• IMPORTANT: Door must always be in the closed position when adjusting the tension.
• Open and close door to check tension.
• If spring is over tensioned the door will not close fully (Remedy – reduce spring tension, 1/4 decrements
advised).
• If spring is under tensioned door will be heavy to lift. (Remedy -increase spring tension, 1/4 increments
advised).
• NOTE: Always ensure that torque is taken up on winding bar prior to releasing spring set screws.
• With the door in closed position loosen the track wall brackets and move vertical tracks to adjust
clearance from the wall.
• Check all nuts and bolts for secure fastness.
NEVER PUT FINGERS BETWEEN PANELS WHEN CLOSING DOOR.