PART THREE - OPERATION
SECTION 3 - TRANSMITTER CONFIGURATION
PRO-series Model E3 Electrodeless Conductivity Transmitter
4
☞
A.
Press
ENTER key
to display a screen like
. Use
arrow keys
to adjust the
Point 1 conductivity value to an appropriate value,
and press
ENTER key
to enter it.
B.
Press
Ö
Ö
key
once to display
.
C. Press
ENTER key
to display
.
Use
arrow keys
to adjust the Point 1 % concentra-
tion value to correspond with the Point 1
conductivity value, and press
ENTER key
to enter
it.
D. Press
Ø
Ø
key
once and
Õ
Õ
key
once to display a
screen like
.
E.
Repeat steps 6A through 6D to enter the conduc-
tivity and corresponding % concentration values for
each remaining data point in the table.
F.
After all X and Y coordinate values are entered for
each data point in the table, press
ESC key
once to
display
.
G. Press
ENTER key
to display
.
H. Press
ENTER key
again to save the table.
NOTE:
If the table contains unacceptable coordinate
values, the display shows a “CONFIRM FAIL-
URE” message. Pressing
ENTER key
displays
the unacceptable coordinate(s).
