PART THREE - OPERATION
SECTION 4 - ANALYZER CONFIGURATION
Rev. 6-501
Model P53 pH/ORP Analyzer (universal-mount 1/2 DIN)
47
☞
SET TRANSFER
Value (mA)
2.
Press
ENTER key
to display a screen like
. Use
arrow keys
to set the displayed
value at which 0/4 mA is desired, and press
ENTER
key
to enter the value.
3.
After the
6(7 P$ 9$/8(
6(7 P$ 9$/8(
6(7 75$16)(5
6(7 ),/7(5
6&$/( P$P$
(;,7
screen re-appears, use
Ø
Ø
key
to select the “SET 20 mA VALUE” line.
4.
Press
ENTER key
to display a screen like
. Use
arrow keys
to set the displayed
value at which 20 mA is desired, and press
ENTER key
to enter the value.
NOTE:
If the same values are set for 0/4 mA and 20 mA, the
output automatically goes to, and remains at, 20 mA.
Each analog output is normally active, responding to the
measured value of its assigned parameter. However, during
calibration, you can transfer (XFER) each output to a preset
value to operate a control element by an amount corre-
sponding to that value.
To set a mA transfer value for an analog output to suit your
application:
1.
With the
6(7 P$ 9$/8(
6(7 P$ 9$/8(
6(7 75$16)(5
6(7 ),/7(5
6&$/( P$P$
(;,7
screen displayed, use
Ø
Ø
key
to select the “SET TRANSFER” line.
2.
Press
ENTER key
to display a screen like
. Use
arrow keys
to set the displayed
value to the desired mA transfer value, and press
ENTER key
to enter the value.
