background image

To insure proper installation in complete compliance with your warranty, we recommend installation  by a professional installer.

Please use extreme care while unpacking and handling your GlassCrafters’ Mirrored Cabinet Accessory. 

Report any damage immediately to our GlassCrafters customer service team at 800-233-7362, 

Monday thru Friday from 8:00 am to 5:00 pm (EST)

Vertical LED Task Lights for Mirrored Cabinets  

Installation Instructions

Congratulations on your purchase of Americas finest Accessories for Mirrored Cabinets by GlassCrafters, Inc.  

World class engineering and state of the art design will enable you to enjoy your cabinet for many years to come. 

We realize that the marketplace offers many choices and we thank you for selecting GlassCrafters for your Mirrored

Cabinet needs. The following instruction sheets are applicable for installation of this accessory on all Flat or Beveled

Frameless Mirror Cabinets, both 4” deep and 6” deep.

This accessory also may be added to any previously installed surface mounted GlassC  rafters Mirrored Cabinet.

Patent Pending.

GLASSCRAFTERS, INC
193 Veterans Blvd., Carlstadt, NJ  07072

1+(800) 233-7362  (F) 1+(888) 233-7362
[email protected]

06/2016

1

36” High

Vertical Task LED Lights

(Mirrored Cabinet Sold Separately)

24” High 

Vertical Task LED Lights

(Mirrored Cabinet Sold Separately)

30” High 

Vertical Task LED Lights

(Mirrored Cabinet Sold Separately)

This unit’s electrical connections

must be made by a 

Licensed Electrician in a

manner that conforms to the 

National Electric Code.

WARNING

All GLASSCRAFTERS 

Vertical LED Task Light Fixtures for Mirrored Cabinets

must be wired to a Class A 120V AC 15-20 Amp GFCI

circuit (Ground Fault Circuit Interrupter) when used in

bathrooms and all other locations 

required by the National Electr ic Code.

Содержание GC1624

















Отзывы: