OUTLET IN CABINET
ELECTRIC OPTION CABINET
SERVICE AS THRU-WIRE
FOR SHELF UNIT ONLY
SHELF
INSIDE
CABINET
SEPARATE
SERVICE
WIRE FOR
LIGHT
FIXTURE
CABINET
TERMINAL
BLOCK
WIRE
BUSHINGS
L
G
N
BLACK
WHITE
GREEN
L
G
N
GREEN
WHITE
BLACK
DRILL HOLE
1 1/2”
10
LED
DRIVER
OUTLET
IN
CABINET
CONNECTING
BRACKET
ELECTRIC OPTION SERVICE WIRE
SIDE ACCESS THROUGH VOID
BETWEEN CABINET & FIXTURE
SHELF
INSIDE
CABINET
SECOND
TASK LIGHT
WIRING
MAY GO OVER
OR UNDER
CABINET
FOR ACCESS
TASK LIGHT
SERVICE
WIRING
WALL SWITCH
BOX
LIGHTING
CIRCUIT
WIRE
LIGHT
TERMINAL
BLOCK
DIFFUSER
WIRE
BUSHING
FINISHED WALL SURFACE
SCREW
GUIDE
OUTER PANEL
SCREWS
BLACK
WHITE
GREEN
L
G
N
L
G
N
BLACK
WHITE
GREEN
CABINET
TERMINAL
BLOCK
L
G
N
GREEN
WHITE
BLACK
FOR INSTALLATION OF A SURFACE MOUNTED OR
RECESSED MOUNTED CABINET WITH ELECTRIC OPTION
(EO CABINET) BE SURE TO TURN OFF THE POWER AT
THE SERVICE PANEL BEFORE WORKING ON WIRING.
ADJUSTMENTS FOR INSTALLATION ON AN E.O.
CABINET where the Vertical Lights are service wired
through the Electric Option Shelf:
1) E.O. Cabinet Surface Mounted Installation--
Follow the Steps 1-8 as shown on pages 6 & 7 to
install and service wire the Vertical Lights.
2) Option of through wiring for the E.O. Cabinet by
Licensed Electrician:
The Mirrored Cabinet with Electric Option and the
Vertical Lights both have wire access holes that align at
each end of the shelf. Depending the Electrician’s wiring
plan, this allows a through wire connection for the
secparate 20A GFCI circuit for the E.O. cabinet to go
through a Light Fixture and into the shelf. The Service to
the Cabinet must be a dedicated 20Amp GFCI serivce
completely separate from the Vertical LED Task Light
service
.
Vertical LED Task Lights for Surface Mounted & Recessed
4” deep or 6” deep Mirrored Cabinet with Electric Option
NOTE: THE LI
G
HTS MUST
B
E SERVICE WIRED ON A
SEPARATE CIRCUIT FROM THE MIRRORED CA
B
INET
WITH THE ELECTRIC OPTION .
Optional Access for Through Wire Service through a
light fixture for the
separate service
to the Electric
Option.
Licensed Electricians ONLY.
Surface Mounted Mirrored Cabinet with Electric Option--
30” high & 36” high
SECTION VIEW OF 4” RECESSED ELECTRIC OPTION MIRRORED CABINET WITH VERTICAL LED TASK LIGHTS SHOWS
SEPARATE SIDE ACCESS SERVICE WIRE FOR THE CABINET & SEPARATE TASK LIGHT(S) SERVICE WIRING.
SECTION VIEW OF A 4” RECESSED MIRRORED
CABINET WITH VERTICAL LED TASK LIGHTS SHOWS
SEPARATE THROUGH WIRE FOR ELECTRIC OPTION .
REMINDER: You must complete the wire connection to each
terminal block in the Vertical LED Task Lights before
reassembling the light fixtures for any recessed installation
.
Optional Side Mirror Kit:
Do not forget to install the side mirror kit brackets through the pre-drilled
holes in the outside wall of the light fixture before reassembling the fixture
after making the service wire connection.
(See page 11 for detailed instructions,)
DO NOT ALTER
ANY OF THE
FACTORY
INSTALLED
WIRING IN
THE
ELECTRIC
OPTION
SHELF.
