2
Vertical LED Task Lights for Mirrored Cabinet
The following instruction sheets include the ALL FRAMELESS 24”, 30” AND 36” MODELS in both
4” deep and 6” deep Mirrored Cabinets.
WARNING
All GLASSCRAFTERS Vertical LED Task
Light Fixtures for Mirrored Cabinets must be
wired to a Class A 120V AC 15-20 Amp GFCI
circuit (Ground Fault Circuit Interrupter)
when used in bathrooms and all other
locations required by the
National Electr ic Code
.
Index
LED Task Light Parts List for All Models...................3
Wiring Schematic .....................................................4
Determining the Rough Opening..............................5
Installing Vertical LED Task Lights on
:
-- Surface Mounted Cabinet, 4” & 6” deep ..............6 & 7
-- Recessed Cabinet, 4” deep..................................8
-- Recessed Cabinet 6” Deep ................................9
-- Surface Mounted & Recessed Mirrored
Cabinet with Electric Option , 4” or 6” deep.........10
Optional Mirror Side Kit ...........................................11
Assembling Lights with Multiple Cabinets ................12
Door Installation .......................................................12-14
Limit Clip ..................................................................15
Warranty...................................................................16
Unpack all parts carefully and protect
components during installation.
Carefully review all parts and read the installation instruction
before you start.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
To insure proper installation in complete compliance with your
warranty, we recommend installation by a professional installer.
IMPORTANT
SAFETY INSTRUCTIONS
When using the Vertical ED Task Light , basic precautions should
always be followed, including the following:
Read all instructions before using.
DANGER –
To reduce the risk of electric shock:
1. Turn Power off at service panel before working on wiring.
2. DO NOT SPRAY LIQUID CLEANERS on the Vertical LED Task
Light. For cleaning, we recommend using “ammonia free” Sprayway
brand glass cleaner applied to a clean cloth.
WARNING –
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Use this Vertical LED Task Light only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
2. Do not use outdoors.
SAVE THESE INSTRUCTIONS
Any servicing is to be performed by an authorized service
representative. The unit has no user serviceable parts.
A. Safety Glasses --
should be worn at all
times
B. Tape Measure
C. Level
D. #2 Phillips Head
Screw Driver
E. Power Screw Driver
Tools Required for Installation
GlassCrafters recommends the following tools to
properly and safely install your Vertical lights on a
Glasscrafters Cabinet.
Cleaning Recommendations:
Never use abrasive cleaners or cleaners
containing ammonia. This may cause
chemical damage to the mirror and void
the warranty.
For cleaning the mirror, we recommend
using ammonia free Sprayway brand glass
cleaner, which is available at a variety of
retail outlets.
www.spraywayinc.com/content/glass-cleaner
A Maximum of 4 interconnected units may be installed utilizing a
Class A 120V AC GFCI circuit. Each Vertical LED Task Light is
powered by a 12V driver and the assembled 2 fixture unit is rated to
draw 3± amps. Electric wiring must be by a licensed electrician.
Recessed or wall mounted installations should be performed by a
professional installer.
