11
OPTIONAL Side Mirror Kit Installation
For surface mounted 4” and 6” Mirrored Cabinets and semi-recessed
6” Mirrored Cabinets.
It is recommended to complete the wall Mounted installation
before reassembling the Vertical Light Fixtures. (see page 6).
Make the service wire connections as shown on page 6 for both
fixtures.
1) Attach the side mirror kit brackets thru the pre-drilled holes in the
Mounting Panel (outside wall) of the light fixtures while they are
disassembled to make the service wire connection.
2) Use the row with two holes 5” from the top and bottom of Mounting
Panel (outside panel). Using the four 10 -32 x 1/2” screws provided to
fasten the brackets.
3). Reassemble the fixtures on the complete Wall Mounted Cabinet as
shown in step 8 (page 6).
4) Attach the 2” x 2” foam pads to the outside wall above, below and in
between the position of the brackets.
7) Clean the backside of the side mirror kit panel with the Alcohol pads.
Check alignment before you attach the mirror to be sure it will align
even with the top of the cabinet.
8) Peel off paper covering of the adhesive tape on the side kit brackets
pads.
(This holds the mirror in place)
. Carefully align the mirror to the
fixture wall evenly on all four sides. Press firmly into place to attach the
side kit mirror to the outside wall of te fixture.
(Note: Once installed, do not try to remove the mirror as it will break.)
Side Mirror Kit parts list:
2 Mirror side panels to match the
model height ordered
4 Side kit brackets with
adhesive tape
6 2”x2” Black Foam Pads with
peel off adhesive
8 Screws, 10-32 x 1/2”
8 Screw Caps ( part # 434-00)
2 Alcohol Pads
To view a video showing helpful tips
on how to install mirrored side kits,
please go to GlassCraftersMirrored
Cabinets.com and navigate to the
cabinet product that you are in-
stalling. Simply click on the
installation tab (located below the
product images) to view our
installation videos.
Side Mirror Bracket
Side Mirror
10-32 1/2” Screws
2” x2” Foam Pads
