3.2 Preparations
Check the package contents
Check the package content for visible signs of transport damage and for completeness.
Damaged parts
Do not install parts damaged during the shipment. In case of damaged parts, contact your supplier.
Keep the supplied documentation and configuration form in a safe place. The documents belongs to the
Navigation and signal lights controller and they are required for subsequent commissioning.
Selecting mounting position
Navigation and signal lights controller needs to be installed on the bridge, main unit should be installed on
console in accordance with guidance notes on ergonomic design of navigation bridges. Power supply and
input modules needs to be installed inside console. Modules need to be easily accessible for manual
operation of lights. Preferable arrangement is shown below.
Please note cable lengths supplied with the equipment!!!
Main unit
Allow sufficient clearance around main unit for mounting as well as connection of cables and wires.
Minimum distance (x = 40mm; y=40mm; z=150mm)
Do not install main unit near power cables!!!
It is not recommended to install main unit on direct sunlight.
The material in the area of the mounting cut-out must provide sufficient strength to guarantee the enduring and
safe mounting of the main unit.
The force of mounting clamps or operation of the main unit must not lead to deformation of the material.
Power supply and input modules
Allow suficient clearance around modules for mounting and for the connection of cables and wires.
Minimum distance 20mm around modules. Arrange modules in a way that communication cables are not
routed together with power cables or lights cables.
.
Console
Main
unit
Main unit cable -
original cable
2.5m long
Power
supply
module
Input
modules
Cable trays
Input module cable -
original cable
1.5m long
x
x
y
y
z
Allow sufficient clerance of 20 mm around modules
Switches for manual acctivation, fuses and labels should
be clearly vissible and accessible.
11
