Required information:
For starting up procedure it is required to have following information:
- name of lamps
- color of lamps
- position of lamps
- type of lamps (double or single)
- power supply of lamps
Steps:
1. Navigation lights controller is installed and connected according manual
2. Turn on power supply and turn on main unit.
3. Check if configuration on controller is in accordance with information regarding lights.
4. Light check:
a) Turn on light.
b) Visually check light for operation
c) Compare position of light on ship with configuration on main unit
d) Turn off light
5. Repeat step 4. for all lights
6. Simulate light failure for some lights by disconnecting light cable or removing bulb.
IMPORTANT!!! Dangerous voltages!!!
7. Check operation of external alarm output contact.
8. Check manual acctivation of some lights by switching them directly on input module.
9. Check NMEA communication with other systems. (if exsisting)
10. Fill-in project information given bellow and send configuration back to manufacturer (next page)
6. Commissioning
6.1
Commissioning procedure
OK
Ship name:
IMO no.:
Shipyard:
Hull no.:
Commisioning date:
Company:
Done by:
Navigation and signal lights’ controller ITNSL-01
Main unit type ITNSL-01T
Power supply unit ITNSLP-01
Code
Input unit type ITNL
Input unit type ITNL
Input unit type ITSL
Input unit type ITSL
Serial no.
31
