Wireless dimming actuator, 4-gang
Parameters
Setting options, Basic setting
Explanations
Operating mode
Normal operation
Continuous on
Continuous off
Basic setting: Normal Opera-
tion
Normal operation
The output can be operated
with radio transmitters and the
Prog button.
Continuous on
The output switches to con-
tinuously "On". All operations
of radio transmitters and the
Prog button are ignored.
Continuous off
The output switches to con-
tinuously "Off". All operations
of radio transmitters and the
Prog button are ignored.
Channel assignment
Parameters
Setting options, Basic setting
Explanations
Parallel operation
Channel 1, 2, 3, 4
Channel (1+2), 3, 4
Channel (1+2+3), 4
Channel (1+2+3+4)
Channel (1+2), (3+4)
Basic setting: Channel 1, 2, 3,
4
Two to four outputs can be
switched together to boost
power. The parameter is only
changed over for the display
in the commissioning inter-
face. The actual setting must
be made on the device.
Advanced device settings
Parameters
Setting options, Basic setting
Explanations
Manual commissioning
On, Off
Basic setting: On
Blocks manual commissioning
for the device channel.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
Channel settings
Parameters
Setting options, Basic setting
Explanations
Switch-on brightness
1...100 %
Basic setting: 100 %
During brief operation, the out-
put switches on at the set
switch-on brightness.
Note: If the value is above the
set maximum brightness or
below the minimum bright-
ness, then the system will
switch to the appropriate limit
value.
Minimum brightness
1...67 %
Basic setting: 5 %
Specifies the minimum set-
table brightness.
Note: If parameters or scene
values are set to a level lower
than the minimum brightness,
then the system will dim to
minimum brightness.
10 / 19
32578622
10867484
01.10.2019