Gira 2617 Series, Руководство по эксплуатации

Страница: 36 / 52

36
36
V
Assigning mode to an individual user finger
To assign the corresponding mode to a user finger, pro-
ceed as follows:
1. Press the "Systemprogr." button on the control device
for 3 secs. to start programming mode.
3 The LED at the control devices flashes.
The fingerprint reader generates an acknowledgement
tone and the LED flashes orange.
2. The corresponding mode can be selected by laying on
of the user finger:
3 When the user finger is first laid on, the current active
mode is displayed with acknowledgement tones and
flashing of the green LED.
3. With a repeated laying on of the user finger, the finger-
print reader changes to the next mode.
4. Repeat step 3 until the desired mode is reached.
5. Press the "Systemprogr." button on the control device
to exit the programming mode.
Mode
Indiv.
actuator
Group
actuator
Relay Tones LED
1 YES NO NO 1 1-gang
2 YES YES NO 2 2-gang
3 YES NO YES 3 3-gang
4 YES YES YES 4 4-gang