Gira 2617 Series, Руководство по эксплуатации

Страница: 18 / 52

18
18
III
Teaching-in user finger for relay 1
Start mode:
1. Lay the administrator finger on until a short acknowl-
edgement tone is heard.
3 The LED briefly lights up green, then flashes orange.
2. Lay the programming finger on until a short acknowl-
edgement tone is heard.
3 The LED briefly lights up green, then flashes orange
twice.
3. Lay the administrator finger on until a short acknowl-
edgement tone is heard.
3 The LED briefly lights up green, then orange.
Teaching-in new user finger:
4. Lay the user finger on until a short acknowledgement
tone is heard.
3 During laying on the LED lights up red, after removal
orange.
5. Lay the same finger on again (vary position slightly)
until a short acknowledgement tone is heard.
6. Repeat step 5 until 2 long acknowledgement tones are
heard and the LED lights up green.
3 The user finger was taught-in successfully.
7. Enter the user in the table on Page 45.
3 The LED lights up orange, further user fingers can now
be taught-in.
Admin Progr. Admin User
NEW
(7x)