Gira 2617 Series, Руководство по эксплуатации

Страница: 32 / 52

32
32
V
Assignment
User-specific switching actuator/door opener
User fingers must be taught-in in the fingerprint reader
beforehand (from Page 18).
1. Press the "Systemprogr." button on the control device
for 3 secs. to start programming mode.
3 The LED at the control device flashes. The fingerprint
reader generates an acknowledgement tone and the
LED flashes orange. The operating mode LED of the
switching actuator flashes.
2. Press the button "Progr." at the switching actuator
(or the button "Türöffnerprogr." of the control device),
until the LED next to the button flashes.
3 The fingerprint reader again generates an acknowl-
edgement tone.
3. Lay on the user finger to be assigned.
3 The fingerprint reader generates a positive acknowl-
edgement signal:
The switching actuator was assigned successfully.
4. Press the "Systemprogr." button on the control device
to exit the programming mode.
i
Delete assignment of user -
switching actuator
To delete the user - switching actuator assignment, the
teach-in procedure is repeated.
The assignment cannot be deleted via the switching
actuator (press programming button 6 secs.)