Gira 2617 Series, Руководство по эксплуатации

Страница: 25 / 52

25
25
IV
Switching illumination of contact surface on/off
Factory setting: The night illumination of the fingerprint
reader contact surface is activated.
Changing illumination setting:
1. Lay the programming finger on until a short acknowl-
edgement tone is heard.
3 The LED briefly lights up green, then flashes orange.
2. Lay the administrator finger on until a short acknowl-
edgement tone is heard.
3 The LED briefly lights up green, then flashes orange
twice.
3. Lay the administrator finger on until a short acknowl-
edgement tone is heard.
3 The fingerprint reader generates a positive acknowl-
edgement signal.
The night illumination changes its status.
Progr. Admin Admin = Setting changes