10
Before turning the salamander on for the
first time, remove all the packaging material
and clean the unit thoroughly, removing all
the protective industrial grease as follows:
•
clean the unit with a damp sponge
and a mild detergent;
•
rinse the grill with clean water�
2.2 Setting
It refers to
fig.4
�
1. Heating elements selection
:
units with two resistances: if the L1 LED is on the two resistances
are working at maximum power, if the right L2 LED is on the two
resistances operate alternately;
units with three and four resistances: if the left L1 LED is on only
central resistances are working, if the right L2 LED is on the unit
is working at maximum power and the central resistances operate
alternately�
2. START
button
3. STOP
button� It can also be used to stop the buzzer�
4. Set time display
5. Timer
6. Main switch
(units without holding): 0= OFF ; 1 = ON
7. Main switch
(units with holding): 0=OFF; 1=Preheat/holding; 2=O
SALAMANDER WITH THREE HEATING ELEMENTS
SWITCHING ON:
•
Switch on main switch upstream of appliance�
Fig. 6