Gilson VERITY 1741, Руководство пользователя

Страница: 50 / 60

44
FRonT PAnEl conTRol
|
VERITY® 1741 UV-VIS DETEcToR
F
R
O
n
T
p
A
n
e
L
C
O
n
TR
O
L
F
R
O
n
T
p
A
n
e
L
C
O
n
TR
O
L
Sound
Set the sound signals for the detector. All items are activated by default.
Sound Settings
Setting Description
KEYBOARD
At each touch of a button, a short beep will sound when the key does not have any significance at
the moment, a mid-length beep for a value change and moving within a menu, and a longer beep
for confirmation of a value change.
ERRORS
In the case of an error, three consecutive, longer beeps will sound. In the case of a fatal error, the
three, consecutive, longer beeps will sound every 5 s. Stop the beeps by pressing any key.
OPERATIONS
A beep sounds at the beginning and end of an operation. During operation, a longer beep may
sound.
STATES A signal sounds when the mode is changed.
Lamps
optionally, set up automatic lamp ignition.
Lamp Ignition Settings
SETTING DESCRIPTION
LAMPS AUTOSTART OFF The lamps do not turn on automatically when the detector is turned on. To
ignite the lamps, press the LAMP key.
LAMPS AUTOSTART ON The lamps turn on automatically when the detector is turned on.
Leakage
The leak sensor contains both a reference and a measuring sensor. If the measuring sensor is
immersed in liquid, the sensor generates a signal. Signal processing is dependent on the setting:
Setting of Leak Sensor Behavior
Setting Behavior
OFF Signal is ignored.
STATE FLAG Warning sign.
WARNING Warning is displayed. Default setting.
FATAL ERROR Invokes a fatal error, where light sources turn off and the detector goes to IDLE (IDD) mode.
To stop the leak sensor signal from sounding, it is necessary to remove the source of the liquid
leak and thoroughly dry the sensor surroundings. After drying the sensor and its surroundings,
the warning signal will stop within approximately 80 seconds.