manualshive.com logo in svg

Gilras GRU-5000 A, Руководство по эксплуатации

Поделиться
Скачать
Gilras GRU-5000 A Скачать руководство пользователя страница 54

Chapter 7    Maintenance, Attentions and Simple Defects Treatment 

- 45 - 

Keep the probe unmovable; click SCAN/FREEZE key to repeat measuring. If the results show 
good repeatability, it indicates the biometry mode of the equipment works well.     

7.5 Trouble Shooting 

1)  In case of connection failure, please check first if the power supply and probe are well 

connected. 

2)  In case of printing failure, please check first if it is out of printing paper or paper jam. 

3)  In case of clock failure which can not be restored by restarting, possibly, the clock battery is 

used up. The battery can't be replaced by operator, please contact your distributor for repair.   

4)  In case of display or operation failure, please switch off the power and restart, check if it is 

back to normal. 

5)  In case of overheat or other abnormalities, please switch off the mains power immediately to 

prevent danger.   

6)  The over-current protection fuse is sealed inside the power adaptor and can't be replaced by 

user. If the power adaptor has no DC output, please pull out the main power plug and contact 
the manufacturer for repair.   

If above operations are not effective, please don’t open the housing without authorization. Contact 
your local distributor immediately. Explain the problems in detail for proper and in time support. 

If required, we can provide the complete maintenance and repair manual to the authorized 
qualified engineers of service stations. 

The Biometer is a high-tech product designed and built with high level of precision. Only qualified 
trained engineers are authorized to repair the instrument.   

We are not responsible for problems caused by any kind of unauthorized repair.   

Содержание GRU-5000 A





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды