Gilras GRU-5000 A, Руководство по эксплуатации

Страница: 52 / 68

Chapter 7 Maintenance, Attentions and Simple Defects Treatment
- 43 -
Chapter 7 Maintenance, Attentions and Simple Defects Treatment
7.1 Maintenance and Attentions to Instrument
1) The instrument should be operated in a clean environment. Air-conditioned environment is
recommended.
2) The instrument should be placed on a stable worktable or platform. Avoid direct sunlight.
3) Please use the supplied Power Adaptor which is in accordance with the safety standard of
medical electric equipment; do not use other adaptors or adaptors of other equipment with the
instrument.
4) Although anti-interference measures which are in accordance with IEC 60601-1-2 have been
adopted, the instrument should be placed to avoid strong electromagnetic radiation equipment
(such as microwave, radio frequency therapy equipment, etc.)
5) Routine inspection and maintenance should be carried out only if the mains power is switched
off. None corrosive detergent is allowed to clean the housing. Avoid water and liquid flowing
into the housing. Only a mild detergent may be used with soft tissue cloth.
6) In humid area and/or season, if the instrument is not used for a long time, it should be
power-on for one hour per month to get the damp out.
7) Avoid drop or severe shock when moving the instrument. Give particular attention to protect
the probe.
8) Do not block the ventilation window of the instrument. When the temperature of the instrument
is not normal, please contact the manufacturer for service.
9) The instrument should always be placed in a secure location to prevent probe falling
damages.
10) The instrument has no special protective measures for discharge effect of cardiac defibrillators;
it is not suitable for use with high-frequency surgical equipment
11) Please follow the related provisions of the local environment protection when the instrument is
abandoned. Same way can be taken with the electronic devices (computers, etc).
7.2 Maintenance and Attentions to Probe
1) Do not autoclave the probes.
2) Don't wind the probe cable in coil less than 9 cm (3.5 inches); Check the probe cable regularly
and stop using immediately if it is damaged or broken, contact the manufacturer or the local
distributor for service.
3) Probe should be handled gently to avoid collision and drop, in order to prevent break and
damage.
4) Avoid drop or scratch of the surface of probe when the probe is used or moved; make sure the
probe is removed from the main unit and put into the packing bag during transportation.