Gilras GRU-5000 A, Руководство по эксплуатации

Страница: 39 / 68

Chapter 4 Operation
- 30 -
1) Enter into the DATA BASE (as shown in Figure 4.22) to check patient information list. Click
the needed patient information and a blue bar displays which indicates that the current item is
selected.
2) Click OK to enter the Measuring Data Display Interface. If no item is selected, the dialogue
box will indicate Nothing Selected. In the Measuring Data Display Interface, some function
keys under the interface are invalid. The keys are grey and there is no response when
clicking.
3
）
Under the Measuring Data Display Interface of ASCAN (see Figure 4.23), the data group can
be selected and the measuring waveform be displayed by controlling the up and down keys.
The Measuring Data Display Interface displays the measuring result saved initially but can not
make amendment for the saved data and waveforms, and without measuring functions. The
threshold value can be observed but not be amended. Under the Measuring Data Display
Interface, it is able to enter the IOL Interface by clicking IOL to check the saved data or input
the parameters for recalculation. The newly input parameters and calculated result can't be
saved. If measurement or storage of new data is required, please return to the normal working
interface.
To exit from the IOL Interface, it's required to click ASCAN key to enter the ASCAN Interface
and click BACK key to return to the DATA BASE Interface; click EXIT key to exit and return to
the normal working interface.
Under the Measuring Data Display Interface, the data can not be processed. If clearance or
deletion is required, please exit from this mode and return to the DATA BASE Interface to
clear or delete the selected information. Click EXIT key under the DATA BASE Interface to
exit and return to the normal working interface.
4.3.5 Amendment and Storage of Parameters, and Clock Setting
Click SETUP key in the MENU Interface to enter the SETUP Interface, in which there are four tab
pages.
4.3.5.1 Printing Parameter Setup for A Biometer
Click A_PRINT key to enter the A_PRINT tab page, as shown in Figure 4.24, which is the tab
page for ASCAN to set up printing parameters. The operator can choose the information need to
be printed out. The default setting is to print out all information, including: patient information,
measuring information, IOL calculating parameters, calculating results and output waveforms.