Gilras GRU-5000 A, Руководство по эксплуатации

Страница: 45 / 68

Chapter 5 Cleaning, Disinfection and Sterilization
- 36 -
The Alkazyme solution can be used within 8 days if kept in sealed flasks. The solution can also be
made up in a 4L recipient using demineralized or distilled water fill up the soaking tray from there.
OR:
---- 1-0.5% Aniozyme solution in water (25g sachet):
1) Pour in 1L warm water (25-30 )
℃
2) Put into the unopened sachet.
3) Wait for 1 minute
4) Pour in 4L warm water and stir.
Sterilization Agent
1) ---- 1-0.5% Alkacide solution in water:
2) Pour 5L distilled in flask
3) Pour in the Alkacide
4) Stir it
The Alkacide solution can be used within 8 days if kept in sealed flask.
Please pour in soaking tray (500ml) when sterilization is necessary.
Replacing Contents of soaking trays
For frequent use, the contents of the trays should be replaced at the beginning of the morning and
beginning of the afternoon.
Wait 10 minutes after the last sterilization before emptying out the Alkazyme or Aniozyme
solutions.
5.5 Standard Method
NOTES:
 Please disconnect the probes from the machines. Machines must be turned off first.
 Please avoid splashing any liquid onto the electrical connectors.
A-Probe
Sterilization
1. Immerse the probe and the cable (except the
connector) in the solution of Alkazyme or
Aniozyme for 5 to 15 minutes depending on the
perceived level of risk 2. Clean the probe and the cable in the solution
with the brush for 1 minute.