Gilras GRU-5000 A, Руководство по эксплуатации

Страница: 41 / 68

Chapter 4 Operation
- 32 -
Figure 4.25 LOGIN SET Parameter Setup
Complete all amendments mentioned in §4.3.5.1
～
§4.3.5.2 and select SAVE key to save the
selected result. Click RESET key to recover the initial values. Click EXIT key to exit from the
interface. Click LOGOFF key to exit from the system and the system can be re-selected after
entering into the LOGIN Interface.
Note: The functions of SAVE and RESET will save all parameters in A_PRINT and
LOGIN SET tab pages, or reset all settings to initial values. Please confirm
before the operation.
4.3.5.3 Clock Set
Figure 4.26 CLOCK SET
If it is required to reset date and time, please click CLOCK SET key in this interface to enter the
clock set tab page, as shown in Figure 4.26, where time is displayed in real-time. Click CLOCK
SET key to change the clock setting. At that time, the clock stops, click NEXT key to move the
cursor in the text box to the next position successively and circularly until reaching the right